garden-irrigation

Automated irrigation skill for greenhouse and outdoor garden zones. Reads Tuya soil sensors (avg of last 50 readings, looking back up to 7 days), fetches rolling 7-day weather history + 3-day forecast from Open-Meteo, and makes deficit-based watering decisions. Generates a bilingual (EN/ZH) Markdown report on every run.

Tools

irrigation_report — report only, no valve actuation

Read all sensors, fetch weather, compute decision for every zone, and generate a report. Does not open any valves.

python scripts/run_with_notifications.py

Use when the user asks: "should I water today?", "garden status", "irrigation report", "今天需要浇水吗？"

run_irrigation — full automation

Read sensors, fetch weather, decide, and open valves automatically if soil moisture is below the zone threshold. Respects automation config (enabled, max minutes per session).

python scripts/run_once.py

Use when the user asks: "water the garden", "run irrigation", "start watering"

run_irrigation_with_confirmation — confirm before watering

Same as run_irrigation but prompts y/n on stdin before opening each valve. For each zone that needs water it prints the zone name, suggested duration, and reason, then waits for interactive input. Zones where the user answers n are skipped and logged as cancelled.

python scripts/run_with_confirmation.py

None of the three scripts accept CLI arguments — all configuration is read from config/system.json and config/zones.json.

Decision logic

For each zone:

avg_moisture = mean(last 50 humidity readings per sensor, looking back up to 7 days)
                └─ falls back to current reading if Tuya logs API unavailable

recent_rain_mm  = sum of precipitation_sum over the last 7 days (Open-Meteo history)
forecast_rain_mm = precipitation_sum for the next 1 day (Open-Meteo forecast)

if avg_moisture < target_moisture_min (default 30%):
    deficit  = target_moisture_min - avg_moisture
    minutes  = default_minutes + round(deficit / 5)   ← +1 min per 5% deficit
    if zone is rain_sensitive AND (recent_rain_mm ≥ 8 OR forecast_rain_mm ≥ 5):
        minutes -= 4
    if any of the last 3 irrigation log entries exist for this zone:
        minutes -= 1                                  ← recently watered penalty
    minutes = clamp(0, minutes, max_minutes)
    → water if minutes > 0
else:
    → skip  (reason: "within target range" if ≤ target_moisture_max, else "above target range")

Zone configuration (config/zones.json)

Edit config/zones.json to set your device IDs:

• soil_sensor_ids — list of Tuya soil sensor device IDs for the zone
• valve.device_id — Tuya water valve device ID
• valve.switch_code / valve.countdown_code — DP codes (e.g. switch_1, countdown_1)

System configuration (config/system.json)

Key settings:

• location.name / latitude / longitude — used for weather lookup
• timezone — e.g. Europe/Oslo
• language — "auto" (follows query language), "en", or "zh"
• automation.enabled — master switch for valve actuation
• automation.max_minutes_per_session — safety cap (default 20 min)
• automation.require_confirmation — if true, run_once.py skips actuation (use run_with_confirmation.py instead)

Reporting / notification settings (all under reporting):

• enabled — must be true for any notification to be sent
• send_report_to_bot — must also be true to actually send
• send_on_irrigation — send when watering is triggered (default true)
• send_on_no_irrigation — send even when no watering needed (default false)
• bot_account_id — OpenClaw account ID of the bot that sends the message
• bot_target — destination the bot sends to (e.g. a Telegram chat ID)

Report format

Every run produces a Markdown report saved to data/reports/ and (if configured) sent via Telegram:

# 🌱 Daily Irrigation Report
*Generated at: YYYY-MM-DD HH:MM UTC*

## 🌤️ Weather Summary
## 📡 Device Status        ← per sensor: avg (last 50 readings) + current moisture, temp, battery
## 💧 Irrigation Decision  ← per zone: should water, duration, reason

Data is written to ../data/ relative to the skill folder (created automatically). Config files from ../config/ override local config on every run.

Setup

# .env (project root)
TUYA_ACCESS_ID=your_access_id
TUYA_ACCESS_SECRET=your_access_secret
TUYA_API_ENDPOINT=https://openapi.tuyaeu.com

Requires the tuya-cloud skill installed alongside this skill.

Troubleshooting