A2A Gateway Setup

Configure the Claw Crony A2A Gateway plugin for cross-server agent-to-agent communication using the A2A v0.3.0 protocol.

Prerequisites

• OpenClaw ≥ 2026.3.0 installed and running on each server
• Network connectivity between servers (Tailscale recommended, LAN or public IP also work)
• Node.js ≥ 22

Step 1: Install the Plugin

mkdir -p <WORKSPACE>/plugins
cd <WORKSPACE>/plugins
git clone https://github.com/ccccl8/claw-crony.git claw-crony
cd claw-crony
npm install --production

Replace with the agent workspace path. Find it with:

openclaw config get agents.defaults.workspace

Step 2: Register Plugin in OpenClaw

Get current allowed plugins first to avoid overwriting:

openclaw config get plugins.allow

Then add claw-crony to the existing array (do NOT drop existing plugin ids):

# Example only — include your existing plugins too
openclaw config set plugins.allow '["<existing...>", "claw-crony"]'
openclaw config set plugins.load.paths '["<ABSOLUTE_PATH>/plugins/claw-crony"]'
openclaw config set plugins.entries.claw-crony.enabled true

Critical: Use the absolute path in plugins.load.paths. Relative paths will fail.

Step 3: Configure Agent Card

openclaw config set plugins.entries.claw-crony.config.agentCard.name '<AGENT_NAME>'
openclaw config set plugins.entries.claw-crony.config.agentCard.description '<DESCRIPTION>'
openclaw config set plugins.entries.claw-crony.config.agentCard.url 'http://<REACHABLE_IP>:18800/a2a/jsonrpc'
openclaw config set plugins.entries.claw-crony.config.agentCard.skills '[{"id":"chat","name":"chat","description":"Bridge chat/messages to OpenClaw agents"}]'

URL field rules

Do NOT confuse these two. agentCard.url tells peers where to send messages. agentCardUrl tells you where to discover the peer.

Note: this plugin also serves the legacy alias /.well-known/agent.json, but the official SDK default is /.well-known/agent-card.json.

Step 4: Configure Server

openclaw config set plugins.entries.claw-crony.config.server.host '0.0.0.0'
openclaw config set plugins.entries.claw-crony.config.server.port 18800

Step 5: Configure Security

TOKEN=$(openssl rand -hex 24)
echo "Save this token: $TOKEN"

openclaw config set plugins.entries.claw-crony.config.security.inboundAuth 'bearer'
openclaw config set plugins.entries.claw-crony.config.security.token "$TOKEN"

Share this token with peers who need to send you messages.

Step 6: Configure Routing

openclaw config set plugins.entries.claw-crony.config.routing.defaultAgentId 'main'

Step 7: Add Peers

openclaw config set plugins.entries.claw-crony.config.peers '[
  {
    "name": "<PEER_NAME>",
    "agentCardUrl": "http://<PEER_IP>:18800/.well-known/agent-card.json",
    "auth": {
      "type": "bearer",
      "token": "<PEER_INBOUND_TOKEN>"
    }
  }
]'

For multiple peers, include all in one JSON array.

Step 8: Restart and Verify

openclaw gateway restart

# Verify Agent Card
curl -s http://localhost:18800/.well-known/agent-card.json | python3 -m json.tool

# Verify peer connectivity
curl -s http://<PEER_IP>:18800/.well-known/agent-card.json | python3 -m json.tool

Step 9: Configure TOOLS.md

This step is critical. Without it, the agent won't know how to use A2A.

Read references/tools-md-template.md and append the A2A section to the agent's TOOLS.md, replacing placeholders with actual peer info.

For outbound messaging, use the SDK script (scripts/a2a-send.mjs).

To use the SDK script, ensure @a2a-js/sdk is installed in the plugin directory:

cd <WORKSPACE>/plugins/claw-crony && npm ls @a2a-js/sdk

Step 10: End-to-End Test

node <WORKSPACE>/plugins/claw-crony/skill/scripts/a2a-send.mjs \
  --peer-url http://<PEER_IP>:18800 \
  --token <PEER_TOKEN> \
  --message "Hello, what is your name?"

The script uses @a2a-js/sdk ClientFactory to auto-discover the Agent Card, handle authentication, and print the peer agent's response.

Async task mode (recommended for long-running prompts)

For prompts that may take longer than a typical request timeout (e.g., multi-round discussions, long summaries), use non-blocking mode + polling:

node <WORKSPACE>/plugins/claw-crony/skill/scripts/a2a-send.mjs \
  --peer-url http://<PEER_IP>:18800 \
  --token <PEER_TOKEN> \
  --non-blocking \
  --wait \
  --timeout-ms 600000 \
  --poll-ms 1000 \
  --message "Discuss A2A advantages in 3 rounds and provide final conclusion"

This sends configuration.blocking=false and then polls tasks/get until the task reaches a terminal state.

Server-side timeout configuration (OpenClaw dispatch)

If you still see Request accepted (no agent dispatch available), the underlying OpenClaw agent run may be timing out. Increase:

• plugins.entries.claw-crony.config.timeouts.agentResponseTimeoutMs (default: 300000)

Optional: Route to a specific OpenClaw agentId (OpenClaw extension)

By default, the peer will route inbound A2A messages to routing.defaultAgentId.

To route a single request to a specific agentId (e.g., coder) on the peer, pass --agent-id:

node <WORKSPACE>/plugins/claw-crony/skill/scripts/a2a-send.mjs \
  --peer-url http://<PEER_IP>:18800 \
  --token <PEER_TOKEN> \
  --agent-id coder \
  --message "Run tests and summarize failures"

Note: this uses a non-standard message.agentId field understood by the Claw Crony A2A Gateway plugin. It is most reliable over JSON-RPC/REST. gRPC transport may drop unknown Message fields.

Network: Tailscale Setup (if needed)

When servers are on different networks, use Tailscale:

curl -fsSL https://tailscale.com/install.sh | sh
sudo tailscale up
# Authenticate via the printed URL (use same account on all servers)
tailscale ip -4  # Get the 100.x.x.x IP

Use Tailscale IPs in all A2A configuration. Verify with:

ping <OTHER_SERVER_TAILSCALE_IP>

Mutual Peering Checklist

For two-way communication, repeat Steps 1-9 on BOTH servers:

• [ ] Server A: plugin installed, Agent Card configured, token generated
• [ ] Server B: plugin installed, Agent Card configured, token generated
• [ ] Server A: has Server B in peers (with B's token)
• [ ] Server B: has Server A in peers (with A's token)
• [ ] Server A: TOOLS.md updated with Server B peer info
• [ ] Server B: TOOLS.md updated with Server A peer info
• [ ] Both: openclaw gateway restart done
• [ ] Both: Agent Cards accessible (curl /.well-known/agent-card.json)
• [ ] Test: A → B message/send works
• [ ] Test: B → A message/send works

Troubleshooting