Claude Code Bridge

Bridge every incoming message to a live, persistent claude CLI process running

in a background tmux session. The user interacts via QQ/Telegram/any channel;

Claude Code responds as if they were typing in a real terminal.

Session State Detection (CRITICAL — CHECK EVERY TURN)

At the start of EVERY incoming message, determine session state:

~/.openclaw/workspace/skills/cc-bridge/scripts/cc-bridge.sh "<SESSION_ID>" status

• ✅ Claude Code 会话运行中 → CC mode active, route message to CC
• ⭕ 没有活跃 → CC mode off, respond normally
• ⚠️ CC 正在等待审批 → tell user and await their approval choice

Construct as _ using only [a-zA-Z0-9_].

Routing Logic

Every incoming message:
  1. Run status check
  2. Is it a CC control command?
       "启动cc"    → start
       "关闭cc"    → stop
       "重启cc"    → restart
       "cc状态"    → status
       "/cc peek"  → peek
       "/cc history [N]" → history
  3. Is CC in approval-waiting state?
       YES → parse user's intent (y/n/1/2/3) → approve
  4. Is CC session active?
       YES → forward as send
       NO  → respond normally as OpenClaw agent

Executing Actions

SCRIPT="$HOME/.openclaw/workspace/skills/cc-bridge/scripts/cc-bridge.sh"

"$SCRIPT" "<ID>" start                    # 启动
"$SCRIPT" "<ID>" send '<message>'         # 发送（90s 超时）
"$SCRIPT" "<ID>" send '<message>' --long  # 长任务（5min 超时）
"$SCRIPT" "<ID>" approve 1               # 审批：选 Yes
"$SCRIPT" "<ID>" approve 2               # 审批：选 Allow always
"$SCRIPT" "<ID>" approve 3               # 审批：选 No
"$SCRIPT" "<ID>" approve esc             # 审批：取消
"$SCRIPT" "<ID>" stop                    # 停止
"$SCRIPT" "<ID>" restart                 # 重启
"$SCRIPT" "<ID>" status                  # 状态
"$SCRIPT" "<ID>" peek                    # 原始终端画面
"$SCRIPT" "<ID>" history 200             # 最近 200 行历史

IMPORTANT — message quoting: Use tmux send-keys -l (literal mode) so

special characters ($, !, \) are sent verbatim. The script handles this

internally; just pass the raw message as argument 3.

CC Slash Commands — Direct Passthrough

CC's own slash commands work by sending them via send:

These are NOT OpenClaw commands — forward them verbatim to CC.

All CC slash commands work via passthrough, including ones not listed above.

Handling CC Approval Prompts

When CC encounters a tool it needs permission to run, it shows a TUI selection

menu (arrow-key navigation, not text input). The approve action handles this:

CC shows:
  Do you want to proceed?
  ❯ 1. Yes
    2. Yes, allow from this project
    3. No

The user's reply should be interpreted:

• "y" / "是" / "好" / "1" / "同意" → approve 1
• "2" / "允许" / "一直允许" → approve 2
• "n" / "否" / "不" / "3" / "拒绝" → approve 3
• "取消" / "cancel" → approve esc

Long Tasks & Streaming

For tasks that take a long time (refactoring, writing large codebases):

1. Detect intent: if the user's message implies a large task (e.g. "重构整个项目",

"帮我写一个完整的 XXX"), use --long flag (5-minute timeout)

1. If the output is empty after timeout, use peek to check CC's current state
2. If CC is still working, inform the user: ⏳ CC 仍在处理中，稍后我再检查
3. Then use peek or history to get progress updates

Formatting Replies

1. Prefix CC output with 🤖 CC →
2. Keep code blocks, file paths, and tool output intact
3. If output is empty: reply ⏳ CC 正在处理中... then try peek after 3s
4. If output >3000 chars: show the last 2000 chars, note earlier output available

via /cc history

1. If CC is waiting for approval: clearly show the options to the user

Error Handling

Additional Resources

• scripts/cc-bridge.sh — Full session management (start/send/approve/stop/restart/status/peek/history)
• references/usage.md — User-facing help text and example conversations